You've Been Tagged

Here is a new tag using Bibis Collections "Sweet Kisses" scrapkit

 and tube by Arthur Crowe.

Attitude

I have just been accepted to Bibi's Collection creative team.Woo...this designer sure does have some awesome scrap-kits and I am so excited to be working with her to promote her creations. Here is the first set of tags I've done with here newest kit "Attitude Babe". I hope you like them. Unfortunately I have not enough time to tut these but you can find this kick ass kit HERE. Thanks for looking!!

ll credit for tube used goes to ©Ismael Rac 

and with a license you can purchase it HERE.

Elegant Treasures

This Tutorial was written by me on March 21 , 2012.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Elegant Treasures" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used in this tutorial

Kit: French White By: Hungry Hill Scraps

Exclusive to CDO

Tube © Jennifer Jenesko @ CDO

Mask By: WSL #84

Font: Dancing Script

Lets make a tag!!

Open paper 7, duplicate and close original. Apply frame 1 to center of paper layer. Go to Selections>Invert and paste paper 2 inside the frame.While your frame is still highlighted place the chandelier inside the frame,resize 50%, and place in the upper left corner. Apply your tube and place on the right and press delete. Now open the mirror element in your program. Resize to the width is at 300ppi. Go to selections>Invert and paste the same tube inside the mirror (Blend Luminance Legacy). Merge all layers and copy/paste onto canvas @ the bottom left side of frame 1. Go to Image>free rotate>20>ok. Apply the ewer element to the right side of frame 1 at the bottom (below the crystal box layer), duplicate and mirror it.Apply the marionette element to the top layer,center of crystal box and mirror elements. Merge all layers visable. Resize your canvas 600x600 @72.00. Apply your name and credit info and merge all layers visible. Save to your PC. 

Thanks for trying my tut!!

Trapped Inside Your Love

This tag was created by me using the PTU scrapkit "Love" by Wacky Winnie Designz sold at The Creativity Box. Thank You Sue!The tube used in this tag is ©Celinart pinup sold at SATC and you must have a license to use.Also the ftu mask used is credited to WSL #79.

Sexy Valentine & All Ya Need is Love Tags

Foxy's Designz has released a new kit called "Sweet Love" @ DFS and I created these two tags using this awesome kit. To purchase this kit visit Foxy's store HERE. Thanks nut for a beautiful kit!!!

Sexy Valentine

Tube ©Keith Garvey @ PTE

All Ya Need is Love

Tube ©Thomas Hoover @ PTE

We Are All Angels Tut & Brag-Book Freebie

This Tutorial was written by me on January 27 , 2012.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "We are all Angels" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Here is a brag-book Freebie I created with "Breat of an Angel".
It is 1800x1200 and Personal Use Only. You can DL HERE

Supplies used for this Tutorial are credited to:

Kit:Breath of an Angel By:DNScraps
Sold At: Lollipop N' Gumdrops
Font: Angel Tears

Tube ©Zindy S.D. Nielsen

Let's Begin:

Avarar: 

Open your canvas to 300x300 

Open pp6 and resize all layers 300x300 then apply pp6 to the blank canvas.

Apply yout tube to the left side of the canvas and change the opacity to 36.

Apply the feather element to the right side of your canvas,resizing 10%. Place it at the bottom.Duplicate the feather, mirror it and move up slightly. Duplicate the second feather and flip it>placing it at the top right.

Apply your text and place on the bottom right corner ontop of bottom feather.

Apply your name and place in center right.

Apply credits/copyright info.

Apply stars2 element to top layer.

Merge all layers visible.

Go to image>add border>"10 pixels" on all 4 sides>ok.

Save to PC.

Forum Tag:

Open a new blank canvas 600x300 72 ppi.

Apply pp6 to canvas and resize 75%

Apply your tube to the left side of canvas,resize 85% and change the opacity to 26.

Apply the halo element and move below the tube layer.

Apply the feather element to the right side of your canvas,resizing 10%. Place it at the bottom.Duplicate the feather, mirror it and move up slightly. Duplicate the second feather and flip it>placing it at the top right.

Apply your text and place on the bottom right corner ontop of bottom feather.

Apply your name and place in center right.

Apply credits/copyright info.

Apply stars2 element to top layer.

Merge all layers visible.

Go to image>add border>"10 pixels" on all 4 sides>ok.

Save to PC.

Caught Smoochin

This Tutorial was written by me on January 27 , 2012.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Caught Smoochin" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Kit:Caught Smoochin By:JST
Sold At: Lollipop N' Gumdrops
Font: Heartland

Tube ©Robert Alvardo @ PTE

Mask by: Insatiable Dreams #71

Let's Begin:

Open paper 9,duplicate it and close the original.

Apply your mask and merge layers>group.

Apply ribbon3 to the left side of your mask layer,duplicate,and mirror it.

Apply deco3 below your mask layer on the left side,duplicate and mirror it.

Apply hearts1 element and place in the center of your mask layer.

Apply flowers7 element to the right side of mask layer,duplicate, and mirror it.

Apply hearts3 to the right side,below the flowers7 layer(sticking out slightly towards the center),resize

45%,duplicate and mirror.

Apply your tube to the top layer:bottom/center of your mask layer,resize 85%.

Apply the wordart2 element. Place at the bottom of canvas and add a white drop-shadow(1,-1).

Go to Layers>New Raster Layer>;OK. flood fill your new layer pink (used the pink lips from pp9 to get color),and move to bottom layer in your layers box.

Go to Effects>texture>(choose your texture)>OK.

Activate your WA2 layer and blend>overlay.

Apply your name,credits,copyright info.

Merge all layers visible

Save to your PC!

I Love You Forum Set

This Tutorial was written by me on January 21 , 2012.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "I Love You" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Kit: Hearts N Flowers By: DCC
Sold At: Lollipop N' Gumdrops
Font: Dancing Script

 

Forum Tag:
Open a new canvas 600x300 transparent
Apply paper11 onto your canvas and resize 80%
Apply hearts7 element,duplicate and mirror
Apply bear2 element,resize 40%, and place in left corner of your canvas
Apply ribbon2 element to the left side of your canvas, move up until the curl of the ribbon is visible. Go to layers>duplicate and the Image>mirror.
Apply the I Love You banner and place between the hearts7 element and the duplicate of the hearts7 layer in your layers box.
Apply the cupcake,resize 30%, and place behind the bear2 element(right side).
Duplicate your canvas (shift/D),delete the bear,banner,and cupcake then merge all layers visible.
Now merge all layers on your original canvas and copy/paste on to the duplicate canvas. Resize 96% and add a drop shadow (2,-2).
Apply your name,copyright/credits and then merge all layers visible.
Save to your PC.

 

Avatar:
Open paper11,duplicate, and close the original.
Resize all layers 300x300
Open hearts7 element and apply to canvas
Apply ribbon2 to your canvas,top right, and resize 50%
Apply the I Love You banner,resize 50%, and place below hearts7 element in your layers box.
Apply the bear2 element,resize 45%, and place in the left corner
Apply the cupcake, resize 20%, and place behind the bear2 element.
Duplicate your canvas (shift/D),delete the bear,banner,and cupcake then merge all layers visible.
Now merge all layers on your original canvas and copy/paste on to the duplicate canvas. Resize 96% and add a drop shadow (2,-2).
Apply your name,copyright/credits and then merge all layers visible.
Save to your PC.

Oh My Valentine

This Quick Page was created using Dare's Designz PTU Scrapkit "Oh My Valentine" and can be purchased HERE @ The Creativity Box. There are a million possibilities within this gorgeous Valentine themed kit and here is the quick page I created with it. You may download this personal use quick page HERE.

It is 3600x3600 @ 300ppi.

Santa with the Animals Quick Pages

This adorable kit can be purchased from TCB from Eal Designs shop. I swear this is an adorable kit with unlimited possibility.I created two quick pages with this kit and you can dl them HERE. I would have loved to make more but I have been ill since new years day. Thank You Lisa for your wonderful creativity and allowing me to use your kit!

Here are the qp's with some holiday pics of me and my family....

Happy New Year 2012

This Tutorial was written by me on January 2 , 2012.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "HNY 2012" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Kit: Happy New Year By: Pink Candy Designs

Sold at Lollipop N' Gumdrops

Tube: ©Keith Garvey @ PTE

Mask: 103 By: Insatiable Dreams

Font: Jellyka Delicious

Open a new canvas (transparent)

Apply the disco ball element to the center of your canvas.

Apply pearls2 to the canvas on top of disco ball.

Apply fan element on top of pearls.

Apply mask element to left on top of the fan.

Apply glass2, resize 60%, and place on left side,over the mask handle.

Apply the balloon, resize 60%, and place on upper right of disco ball.

Apply your tube to the top layer, not quite center but not all the way right.

Apply hat3, resize 60%, and place left side of your tube at the bottom.

Apply trumpet, resize 60%, and mirror it. Place it in the center of tube at the bottom.

Apply the horn element,resize 60%, and place below the trumpet layer, to the right.

Apply paper 5 below the disco ball. Apply your mask and merge>group.

Apply the stars element and place on upper left corner of merged mask layer.

Apply your name, credits, and license #.

Merge all layers and save to your pc.

I want to rock you

 

This Tutorial was written by me on December 15 , 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Santa Express" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:
This tutorial was created in PSPX3
PTU Scrap-kit:Kandy Kat By: Pink Candy Designs

Sold at:Lollipops N' Gumdrops
PTU Tubes ©XRACX 

Font:Dancing Script OT
Template: 439  By: Missy

Mask: Insastiable Dreams

I've got something you can open early

My hubby wanted a new pic to put on his phone for wallpaper so I made him this tag.

I used Barbara Jensen's new holiday tubes and the template is from Missy.

Happy Holidays Everyone!

Santa Express

 

This Tutorial was written by me on December 15 , 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Santa Express" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:
This tutorial was created in PSPX3
PTU Scrap-kit: Santa Express By: Angel's Designz
Sold at: The Creativity Box
PTU Tubes ©Barbara Jensen
Font: Santa's Sleigh Full
Template: #437  By: Missy
 

Let's Get Started!
-Duplicate your template and close the original and resize 600x440.
The next several steps is just plugging in your papers into the template layers.
pp12-raster 1 &3
pp11-shapes
pp7-oval
Delete the snowflakes layer.
pp6-thin rectangle
pp14-rectangle
pp8-rectangle
pp12-frame
Delete the word art and word art backing.
Now apply your tube,resize 80%, and place on top layer (in center of template)
Apply lights element, resize 85%, and place below the tube layer (at the top of template)
Apply the snowflake doodle element, place below the raster 6 layer...duplicate & mirror it.
Delete the dotted oval layer.
Apply the stocking element, resize 60%, place it on left side of the frame...duplicate and mirror it.
Activate your square selection tool. Make a square on top layer,over the entire template area. Go to selections>invert>ok. Paste the snow element inside and press delete on your keyboard.
Move the tube to top layer.
Apply present #2,resize 40% and place on the right side of your tube. Now move it below the tube layer...duplicate & mirror it.
Apply present and resize 40%. Place it behind your tube so it looks like she is sitting on it.
Apply mistletoe, resize 40% and place on bottom left,below the oval layer...duplicate & mirror it.
Apply candycane element, resize 40% and move below the snow element layer....duplicate & mirror it.
Apply your name using your chosen font and place it on your tag to your liking.
Apply credits &License #, then merge your tag visible.
Save your tag. PNG or JPEG if you want a white background on your tag.
Thanks for trying my tut & Happy Holidays to you!!!

Silent Night Tag,Cluster pack (Freebie), and Desktop Background (Freebie)

I created quie a bit of goodies with Alison aka Hungry Hill Scraps new PTU scrapkit "Silent Night".

First is a tag with a quick tutorial then a set of 4 cluster frames and a desktop background. The frames and background are being given away as freebies over on the Hungry Hill blog HERE. Please remember to give Thanks to Ali when you snag them. She's very talented and puts alot into bringing you freebies.

OK...here we go!!

This Tutorial was written by me on November22, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Silent Night" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

This tutorial was created in PSPX3

PTU Scrapkit:Silent Night By: Hungry Hill Scraps

Sold at: Digi Fox's Studio

Mask: Winter By: Jenny

(I don't have this link but if it belongs to you and you'd like credit please message me)

Lets begin...

Open a new canvas 600x600/transparent.

Paste paper4 onto canvas.

Apply tree1 to the left side,duplicate,and mirror it.

Apply tree3 and move below the tree1  layer and place behind tree1 on the right side.

Apply tree2,resize 75% and place in front of tree1 on the left side. Duplicate and mirror it.

Apply deer3,resize 50% and place behind copy of tree2on right (upper body of deer sticking out of trees).

Apply gifts element,resize 25%,and place below the tree2 layer on the left.Duplicate the gifts element and move to the right but staying under the tree.

Apply the flurry element,no resize needed,move in layers pallet and place on top of paper4.

Open all your ornament elements. Each element was resized 10%,duplicated,

and placed sparadicly on top of the trees.

Merge all layers>visible.

Apply your mask,merge>group,and resize 95%.

Apply paper2 onto canvas,move to bottom layer and apply your name and credits.

 merge all layers>visible.

Save as PNG or JPEG.

And now for the freebie cluster frames and desktop background...

 

Thanks for your visit and Happy Holidays!

Let It Snow

Check out this beautiful tag I made using Kairinakat Kreations PTU scrapkit "Snow Days".

You can purchase this lovely kit at The Creativity Box and right now sh has her shop on sale 50% off.

Thanks Shelly for this beautiful kit to work with!

Also, credit for the tube used in my tag is ©Ellie_Milk at PFD and the template I used is 

credited to Freebie Friends found HERE.

 

I didn't do a tut for this tag but the idea behind it's creation was my 

own and all supplies used to create this tag were credited above.

Thanks for looking!

XOXOXO

Winters Dream

This Tutorial was written by me on November10, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Winters Dream" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

PTU Scrapkit: Winter Dreams By: Le Paradis De Scraps Sold at: LNG
Tube: Catching Snowflakes By: Zindy S.D. Nielsen
Mask: #5 By: Insatiable Dreams
Font: Jellyka Delicious Cake
 

Let's Make a tag!!!

Open paper 13, duplicate it, and close the original.
Apply the tree (element 1) to the left side of paper.
Apply the second tree (element 42) to the right side of paper.
Apply the fence (element to the center,rezize 50%, and move to the bottom layer.
Apply the snoe (element 2) to the bottom,on top layer.
Apply your tube to the center of your paper.
Merge All layers(visable) and Apply your mask,merge(group).
Merge all layers.
Open your frame (element C5),duplicate it and close the original. Use your magic wand tool to highlight the inside of frame.Go to Selections>Modify>Expand>3>ok. Then go to Selections>Invert. Paste your merged image inside your frame and press delete.
Move frame to top layer.
Apply your ribbon(element 11). Activate your deform tool and tilt the top of the ribbon down just a bit.
Apply your bow (element 52), resize it 25%, and place it at top center of frame (on top of ribbon).
Merge all layers(visable) and resize 500x543/72.dpi.
Resize merged layer  90% (make sure "All Layers" is not checked).
Apply Sparkles (element 32) to the bottom layer.
Add your name and copyright/license # and merge all layers (visable).
Your Finished!!!

Sexy Lil Witch

This Tutorial was written by me on October 31, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Tricks-N-Treats" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Kit: Witches Brew By: Honored Scraps Sold at: The Creativity Box

PTU Tube: Blueberry © Barbara Jensen

Template: #109 By:  Beth

Font: Witches Magic From: Font Space

Mask #22 By: Horse Play's Pasture

Open your template,duplicate it and close the original. Delete the credits and activate the background layer. Apply your mask and merge>group.

Highlight the gray rectangle with your magic wand tool and invert it. Apply paper8,press delete.

Highlight the orange rectangle frame with your magic wand tool and invert it. 

Apply paper5,press delete.

Highlight the oval with your magic wand tool and invert it. Apply paper5,press delete.

Highlight the oval frame with your magic wand tool and invert it. Apply paper2,press delete.

Highlight the black rectangle with your magic wand tool and invert it. Apply paper4,press delete.

Highlight thewhite rectangle with your magic wand tool and invert it. Apply paper9,press delete.

Highlight the oval with your magic wand tool and invert it. Apply your close up tube & press delete.Then blend> Luminance(Legacy)

Apply web beloe the oval layer in the center of template.

Apply tree3 on top of merged mask layer,to the right.

Apply pumpkin2,resize 65%, & place on the top layer,bottom left.

Apply the crow, resize 30%,place above the black rectangle on the right.

Apply the caldron2 element,resize 65%, & place on the bottom right.

Apply the witches hat element,resize 65%, & place between the

pumpkin2 element and the caldron2 element.

Add tour credits/copyright info & merge all layers>visible.

Rezize all layers>72dpi>600x600.

Using your chosen font appy your name and merge all layers again and save to your PC as PNG or JPEG.

Tricks-N-Treats

This Tutorial was written by me on October 31, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Tricks-N-Treats" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:
 PTU Scrapkit by:Foxy's Designz @ Digi Foxs Studio
Tube by: Lady Mishka @ PFD
Font: Ruach LET
Mask by: DBV #111
Open element41,duplicate, and resize to 600x615.
Apply element49(frame) on top of element 41.Resize 50% and place center. Go to selections>modify>expand>3.OK, then go to selections>invert, and paste paper 7 inside.Press delete and deselect your magic wand tool.
Copy tor tube and paste it onto your canvas in between the paper 7 layer and the element 49 (frame) layer. Now, making sure your frame layer is checked in your layers pallet, use your eraser tool to remove the upper part of frame that covers the head/hair/left side of your tube (giving the appearance your tube is coming out of the frame).
Apply element50 0n top layer at the bottom of frame,resize 30%.
Apply element35,resize 30%, and place left of element50.
Apply element6,resize 35%, and place right of element50.
Apply element39,resize 50% and place on top of element41 layer (sticking out below the cupcakes.
Apply element34, resize 50%, and place below the paper7 layer (sticking out from behind the frame) Go to layers>duplicate, then image>mirror.
Apply element1,resize 30%, and move below element34 on the left side.
Apply element2,resize 30%, and move below the duplicate element34 layer on the right side. Go to image>flip.
Apply element36 ,resize 30%, and move to the left side below element1. Go to layer>duplicate and then image>mirror.
Open paper9,resize 600x600. Copy and paste paper into a new layer. Move to bottom layer and apply your mask. Go to layers>merge>group.
Apply your copyright and license #.
Apply your name, the go to layers>merge>visible>ok.
Save to your PC as JPEG or PNG.

Harvest Home Forum Set

I created this forum set using Hungry Hill's PTU scrapkit "Harvest Home" sold at Digi Fox's Studio.

And this lovely Fall tube is PTU ©Zindy S.D. Nielsen

Dark Mistress

This Tutorial was written by me on October 20, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Dark Mistress" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:
 

Kit: Dark Mistress By Hungry Hill Scraps
Sold Exclusively at: Digi Fox's Studio
PTU Tube: "Evil Queen" ©Keith Garvey Sold at: PTE
FTU Font:Wicked Queen From:Dafont
Tag Template: 400  By: Missy of Divine Intentionz
 

Lets Make a tag
Open your template,duplicate it, and close the original. Erase the white background, word art, and the credits. OK...Were working from the bottom layer up.
 Highlight the center circle2, go to selections>invert,paste paper3 inside, and press delete.
 Highlight the square, go to selections>invert,paste paper6 inside, and press delete.Repeat this step for square2.
Highlight the rectangle, go to selections>invert,paste paper11 inside, and press delete.Repeat this step for rectangle2.
Highlight the circle back, go to selections>invert,paste paper4 inside, and press delete.Repeat this step for circle back2.
Highlight the circle, go to selections>invert,paste paper9 inside, and press delete.Repeat this step for circle2.
Highlight frame1, go to selections>invert,paste paper3 inside, and press delete.Repeat this step for frame2 and circle back.
Highlight the frame back, go to selections>invert,paste paper2 inside, and press delete.Repeat this step for frame back2.
Highlight the center circle, go to selections>invert,paste paper10 inside, and press delete.
Go back to your frame back layer. Highlight it,go to selections>invert,and paste your closeup tube inside. In layers box move your tube above the paper layer and resize 50%. Press delete and blend layers>luminance. Repeat this step for frame back2.
Highlight the center circle and invert it. Apply your half tube, resize 70%, move above the paper layer,and press delete.Keeping your tube layer active blend hard light.
Apply candle element to the left,resize 70%, and move to bottom layer. Go to layers>duplicate. Them image>mirror,placing the duplicate candle on the right.
Apply corner web element and place below the circle1 layer.
Apply bow2 element on the left side of the tube (see tag for placement),duplicate it, and move it to the right side of the tube( see tag for placement),
Using your chosen text apply word art/name to the center of tag at the bottom using a light gray color. Repeat this step only using red this time. Place the second set of text on top of the other.
Apply one red and one black rose on the left side of your text. Resize each rose 15%. Repeat this for the right side of text.
Apply diamond circle2, resize 60%, and move below raster 15 layer (above center circle template layer)
Apply License#/credits, merge all layers visible, and Resize tag to 600x414.
Your Finished!!!!

Rustic Garden

I created this tag using Sweet Occasion Designs PTU scrapkit "Rustic Garden". This beautiful kit can be purchased from Lollipops N' Gumdrops in Karen's shop.

Credits for materials used to create this tag go to Mystical Illusisonz for her FTU cookie "Kalynn".

Also, Dafont.com for the Jellyka Delicious Cake Font and Weescotlass Mask 208 here.

Creative Team (CT) Call

Dare Devil

This Tutorial was written by me on October 11, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Dare Devil" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:
Program: PSP X3 (any version will do) 

Kit: Dare Devil By Kim's Korner 

Sold @: The Creativity Box
Tube © Rebecca Sinz @ DSI
Mask by: WSL #83
Font:Stank from Font Space

OK...Let's make a tag!!
(Add a black drop shadow to all elements)
 

Open paper 24,duplicate it ,add your mask and merge layers (group).
Apply frame to the center of the mask layer. Using your magic want tool select inside your frame.Go to selections>modify>expand>5>OK. Then go to selections>invert. Paste paper 13 inside frame and press delete.
Apply bow 2 to your canvas,re-size 40%,and move to the upper right corner of frame.
Apply blood drip element to the top of your frame and blend(burn).
Apply candle2 to the bottom right corner of frame.
Apply the blood drip element and place on top of the candle 2 element,blend(burn).
Re-size your canvas 600x600(All Layers but do not merge).
Apply your tube,re-size 90%, and place below the candle2 element.
Apply your name and add a white drop shadow.
Apply your copyright info and add a white drop shadow.
Merge all layers (visible) and save to your PC.

Old Hallows Eve Tutorial

This Tutorial was written by me on September 29, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Old Hallows Eve" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:
Program: PSP X3 (any version will do)

Kit: Old Hallows Eve By Dare's Designz 

Sold @: The Creativity Box

Tube © Barbara Jensen

Mask by: XEN #08

Font: Wild Wood from Font Space

OK...Let's make a tag!!

"Please note that this is a full size scrapkit. The resizing is a bit dramatic. 

I don't usually do tuts with FS kits but I was inspired by this kit and I wanted to use BJ's awesome Halloween tube."

*Put a black drop-shadow on ALL elements*

Open a new canvas 600x600.

Open paper 3 and paste into your canvas.

Apply your mask and merge>group.

Apply grass element, re-size 20%, and place at the bottom of the mask.

Apply the tree element,re-size 15%, and move it below the grass.

Apply the owl element, resize 3%, and place high on one of the tree branches.

Apply the tumbstone element, re-size 7%, place it on the left side of the tree/below the grass element.

Apply the fence, re-size 20%, and move down,place it on top of mask layer.

Apply the spiderweb,re-size 10%, and place it on the right side of canvas.So it looks like its attached to both the tree and the fence. 

Adjust the color to gray,so it shos up better.

Now apply the spider to the web,re-size it 10%, and apply a gray drop-shadow(not black).

Apply the cloud & moon element, re-size 10%, and place in the upper

right corner on top of mask layer.

apply the pumpkin element,re-size 10%, and place on the right side of the fence.

Apply the skeleton element, re-size 15%, and place to the left of the tombstone element.

Apply your tube to the center of your canvas and re-size her 80%.

Using your text box and your chosen font, type in your name and then convert text to raster layer. Move text and place it on top of the cloud. Then blend>luminance (legacy) and merge>group.

Apply your credits and then merge your layers>visible.

Save your tag to your PC as a PNG or as a JPEG if you want a white backgroung.

Thank You for trying my tutorial!

 

Old Hallows Eve Layout & QP Freebie

I created a layout and a quick page using Dare's Designz PTU "Old Hallows Eve" scrapkit. You can purchase this kit in her shop @ The Creativity Box. To download the free quick page please visit Dare's Designz blog for instructions. 

Thanks DD for letting me create with your lovely Halloween kit!

Layout "Old Hallows Eve"

Free Quick Page "Old Hallows Eve"

Spider Winch

This tag was created by me using DNScraps PTU kit "Spider Delight". 

You can purchase this spideriffic kit at Lollipops N Gumdrops.

Thanks Conchi for allowing me to use your lovely creations.

Flirting with Fall

This Tutorial was written by me on September 16, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Flirting with Fall" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Program: PSP X3 (any version will do)
PTU Kit: Flirting with Fall By: Dark Moon's Dream Sold @ LNG
PTU Tube by: Anna Marine @ CDO
FTU Mask By: DBV #111
Font : Giddy Up Std

OK...Lets make a tag:
Open a new canvas 600x600/72dpi
Flood fill your canvas white
Copy & Paste paper 1 to your canvas as a new layer,apply your mask and merge layer >group.
Apply the fence element to your canvas and leave it where it is.
Apply your full tube to the center of the fence element.
Apply the mushroom element to your canvas, re-size 70%, and place on the left side of fence.
Apply flowerpot, re-size 70%, and place to the right side of the fence.
Apply the acorn element to your canvas, re-size 45%, and place to the left of the mushroom element.
Apply the deco 07 element & place it on top of merged mask layer.
Apply corn element , re-size 45% and place in front of the flowerpot element.
Apply the butterfly element, re-size 30%, and place it on your canvas just above the fence on the left.
Apply the bird element, re-size 30%, and place it on the fence on the right side.
Apply name using text box. Go to your layers pallet and right click on the text layer. Then click "convert to raster layer". Go to Effects>artistic effects>glowing effects>choose settings>ok.
Apply copyright and license # for the tube used using your text box and apply to tag.
Go to layers>merge visible. Then save your tag to your PC.
Thanks for trying my tut!
Tonya

Just a Lil Funk

This Tutorial was written by me on September 6, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "Just a lil Funk" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Program used: PSP 9

Scrap kit: Little Bit of Funk By Kairana Kat 

@ TCB

Tube by: Arthur Crow @ PTE

Mask by: WSL #154

OK…Lets begin!!

The Race Is On

This Tutorial was written by me on September 6, 2011.Any tutorial similar to this is coincidental and by no means is associated with such tutorial. "The Race Is On" was written assuming its followers have working knowledge of PSP and its functions. All supplies used are credited to the artist/copyright owner with a link to their products and no supplies are provided by this site/me. If you follow this tut please give credit to BSD, Broken Sky Dezine, or http://brokenskydezine-gallery.blogspot.com. Either one of the three options are acceptable.

Supplies used for this Tutorial are credited to:

Program used: PSP 9

Scrap kit: Race Driver By: Rebellious Scraps

Sold @ LNG

Tube by: EugeneRzhevski @ PFD

Mask by: WSL #148

OK…Lets begin!!

Open a blank canvas 700x700 & flood fill white.

Copy & paste paper 1 on to your canvas. Apply your mask & merge layers>group.

Apply frame 1 to the left side of your canvas, resize 65%, & then go to selections>modify>expand>4>ok. Then go to selections>invert>ok. Now paste paper 5 into your highlighted area. Press delete on keyboard. (You will need to repeat this for each section of the frame). Move frame to top layer.

Highlight the top section of frame and invert it . Copy and paste your tube into it and press delete. Only the head /top half of your tube should be inside the frame. Blend soft light. Highlight the middle section of frame and invert it it. Copy and paste your tube into it and press delete. Only the breasts of your tube should be inside the frame. Blend soft light. Highlight the middle section of frame and invert it it. Copy and paste your tube into it and press delete. Only the mid section of your tube should be inside the frame. Blend soft light.

Apply flames 4 element to the bottom of your canvas. Move down until it is on top of the mask layer.

Apply helmet, resize, & place on the left side, on top of the flame element.

Apply wire element and place on top of mask layer.

Apply flag 2 element, resize 80%, & move down in your layers box, place on top of mask layer.

Apply flag 1 element, resize 65%, & place on the right side of canvas

Apply the stoplight element, resize, & place right of the flag 1 element.

Copy and paste your tube on the top layer. Re-size 40% & place it to the left of the canvas.

Apply car 3 element, resize 65%, & place on the right side of your canvas.

Apply the pit pass element, resize 15%. Use your deform tool to rotate the pit pass until the clasp looks like its connected to the chain on the tube.

Apply your copyright info &Your name. Place them where you like.

Delete the white background layer and merge all layers visible.

Save to your PC as a JPEG or png file and your finished.